Diesel Loop

Diesel Loop

Potential of Marine System Biomass Cogeneration

 1.             Introduction

 

Green house gas (GHG) pollution is linked to energy source. Large amount of pollution affecting air quality is prone by reckless industrial development. For years, many think that everything that run into the trio of nature, the atmosphere, ocean and soil is infinite. The atmosphere and the ocean that is providing us source of freshening, winds and current are far more vulnerable to polluting activities from manmade energy sources that have run off into them too many poisons that the air, the ocean and land may cease to serve more purpose if care is not taking to prevent pollution affluence. Human activities are altering the atmosphere, and the planet is warming. It is now clear that the costs of inaction are far greater than the costs of action. Aversion of catastrophic impacts can be achieved by moving rapidly to transform the global energy system.

Sustainability requirement that can be solved through energy conservation (cf. IPCC 2007: 13) are energy and associated efficiency, development, environment, poverty. Stakeholder from government's consumers, industry transportation, buildings, product designs (equipment networks and infrastructures) must participate in the decision work for sustainable system. Recently the marine industry is getting the following compliance pressure regarding environmental issues related to emission to air under IMO MARPOL Annex 6. A world without port means a lot to economy transfer of goods, availability of ships and many things. Large volume of hinterland transportation activities import tells a lot about intolerant to air quality in port area. Adopting new energy system will make a lot of difference large number of people residing and working in the port. Most port facilities are powered by diesel plant. Integrating hybrid of hydrogen and solar into the existing system will be a good way for the port community to adapt to new emerging clean energy concept [1, 2].

             

This paper discuss available marine environmental issues, source of energy today, evolution of alternative energy due to the needs of the time and the barrier of storage requirement, system matching of hybrid design feasibility, regulations consideration and environmental stewardship. The paper also discusses holistic assessment requirement, stochastic evaluation, using system based doctrine, recycling and integrated approach to produce energy. With hope to contribute to the ongoing strives towards reducing green house gases, ozone gas depletion agents and depletion of oxygen for safety of the planet in order to sustain it for the right of future generation.

               2.  Energy, environment and sustainable development

 

                Since the discovery of fire, and the harnessing of animal power, mankind has captured and used energy in various forms for different purposes. This include the use of animal for transportation, use of fire, fuelled by wood, biomass, waste for cooking, heating, the melting of metals, windmills, waterwheels and animals to produce mechanical work. Extensive reliance on energy started during industrial revolution. For years there has been increased understanding of the environmental effects of burning fossil fuels has led to stringent international agreements, policies and legislation regarding the control of the harmful emissions related to their use. Despite this knowledge, global energy consumption continues to increase due to rapid population growth and increased global industrialization. In order to meet the emission target, various measures must be taken, greater awareness of energy efficiency among domestic and industrial users throughout the world will be required, and domestic, commercial and industrial buildings, industrial processes, and vehicles will need to be designed to keep energy use at a minimum. Figure1 shows that the use of fossil fuels (coal, oil and gas) accounted continue to increase]. Figure 2 shows the contribution of total energy consumption in the by global region. And Figure 3 show natural gas consumption [2, 3].

                . Current use of renewable energy

 

                Most renewable energy development and supply are in small-scale, particularly on islands and in remote areas, where the import of energy sources through transport, pipeline or electricity grid is difficult or expensive. Individual buildings, industries and farms are also looking to the possibility of energy self-sufficiency to reduce fuel bills, and make good use of waste materials which are becoming increasingly difficult and expensive to dispose of Various studies have been carried out into the extensive use of new and renewable resources, to generate electricity, on a small scale, for rural communities, grid-isolated islands and individual farms. Recent studies focus on:

1. Security of supply: where consideration is given to intermittent sources, demand and supply must be as well matched as possible, and this is generally a function of climate. Available supply sources should be considered in order to find the best possible correlation between demand and supply.
2. Hybrid with conventional system: where energy limited sources used as spinning reserve for times when the intermittent supply does not meet the demand. If this type of spinning reserve is not available, the need for adequate electricity storage was shown to be an important consideration, especially in smaller scale projects.

 

 3.1 Emerging renewable energy system

 

                In order to provide a reliable electricity supply, reduce energy wastage, and enable the energy requirements for heat and transport to be met, the outputs of these intermittent sources may be supplemented by various means. These may include the use of storage devices and the use of biomass and waste materials in engines, turbines and fuel cells for the production of electricity and heat, in vehicles for transportation, or in heating supply or storage systems. The integration and control strategies for all of these components must be carefully considered and implemented, and this complexity has been seen as a barrier to renewable energy system deployment. There are many possible supply combinations that can be employed, and the optimum combination for a given area depends on many factors. The balances being considered can be complex, and this highlights the need for a decision support framework through which the relative merits of many different scenarios and control strategies for a chosen area can be quickly and easily analyzed [4,5].

 

                 

                Where substantial amounts of intermittent sources are used in a system, it is useful to have an outlet for excess electricity, in order to avoid wastage. The electricity stored, using various means, depending on the scale of storage required can be available for use at times when there is not enough being generated to meet demand. The sizing and type of storage system required depends on the relationship between the supply and demand profiles. For excess amount electricity produced this could be used to make hydrogen via the electrolysis of water. This hydrogen could then be stored, used in heaters or converted back into electricity via a fuel cell later as required. Using excess electricity, this hydrogen could be produced centrally and piped to for port or produced at vehicle filling stations for haulage, or at individual facilities in the port. [6,7].

 

 

4. Energy consumption, demand and supply

 

              Energy demand for port work is supply from grids which are well established in most developed world. The method and sitting of generating conventional energy and renewable energy determine system configuration. Hierarchy systems that can be deduced from these two variables are:

 

1. Limited capacity energy: This includes traditional thermal plants coal fired, gas fired, oilfired and nuclear power plants, which supply almost all of the electricity to the national grid in. The amount of electricity that can be generated is limited by the physical capacity of the plant, time for maintenance and unplanned outages.
2. Limited energy plant: they are Renewable Energy Generators plant that are limited by the amount of energy or fuel available to them at a certain time from a certain area (e.g. rainfall, waste, seasonal energy crop yields) and cannot always run at their rated capacity.
3. Intermittent energy plant: recent year has seen increased hybrid generators. Growing distributed renewable generating plants has implications for the organisation of the electricity supply network. Interconnectivity network electrical system configuration. For centralized system it is better to have minor generators throughout the network that will allow many smaller areas of that network to become mainly self sufficient, with the grid stand as backup.

 

             

Fuel cell powered engine can run on pure hydrogen, producing clean water as the only emission. Biodiesel can be used directly in a diesel engine with little or no modifications, and burns much more cleanly and thoroughly than diesel, giving a substantial reduction in unburned hydrocarbons, carbon monoxide and particulate matter. The main barriers to the implementation of alternative fuels is the requirement for a choice of fuel at a national level, the necessity to create a suitable refuelling infrastructure, the length of time it will take to replace or convert existing vehicles, and the need for a strong public incentive to change[3, 7,  8]..

 

 

4.1 Biomass demand and supply

 

 

5. Bioenergy

 

The 21st century is becoming age of recycling where a lots of emphasize is placed on reducing waste and reuse of material to curb current environmental problems, maximizing use of depleting natural resources and conserve energy. Modern day sustainable use and management of resource recommend incorporating recycling culture in human ways and the use of modest process. Biomass is not left behind in this. The use of biomass energy resource derived from the carbonaceous waste of various natural and human activities to produce electricity is becoming popular. Biomass is considered one of the clean, more efficient and stable means of power generation. Enormous being generated from marine system make it imperative for marine industry to tap this new evolving green technology to employ mobile based micro generation biomass for mobile for marine energy system.

 

 

 

Biomass remains potential renewable energy contributor to net reduction in greenhouse gas emissions and offsetting of CO2 from fossil generation. The current method of generating biomass power is biomass fired boilers and Rankine steam turbines, recent research work in developing sustainable and economic biomass focus on high-pressure supercritical steam cycles. It uses feedstock supply system, and conversion of biomass to a low or medium Btu gas that can be fired in combustion turbine cycles. It result in efficiencies of one-and-a-half times that of a simple steam turbine. Biofuels has potential to influence marine industry, and it as become importance for ship designers and ship owners to accept their influence on the world fleet of the future. Especially the micro generation concept with co generation for cargo and fuel can be a good biomass system for ship. And the waste being dumped by ships in port can be use to power land based and coastal infrastructure.

 

This paper discuss review of conceptual work, trend, sociopolitical driver, economic, development, risk approach and future of biomass with hope to bring awareness to local, national and multinational bodies making to adopt biofuels policies. The maritime industry is always slow to adopt new technology. The paper direct awareness call to maritime multidisciplinary expertise in regulation, economics, engineering, vessel design and operation to break the nity gritty barrier. Time has come for the shipping industry to take advantage of growing tide to tap benefit promised by use of waste to power generation for marine system.

 

5.1 Biomass developmental trend

 

 

The current world biofuels market is focused on: Bioethanol blended into fossil motor gasoline (petrol) or used directly and biodiesel or Fatty Acid Methyl Ester diesel blended into fossil diesel. The Fischer-Tropsch model involves catalyzed chemical reaction to produce a synthetic petroleum substitute, typically from coal, natural gas or biomass. It is used to runs diesel engines and some aircraft engines. The use as synthetic biofuel lubrication oil or aid synthetic fuel from waste seems promising and negates risk posed by food based biomass. Oil product and chemical tankers being constructed now are likely to benefit from the use of biomass. However use on gasoline engines ignites the vapors at much higher temperatures pose limitation to inland water craft as more oxide of nitrogen can be released to the atmosphere [10, 11].

 

 

5.1.1 Biomass developmental trend spillage to shipping

 

Just like tanker revolution influence on ship type, demand for biomass will bring capacity, bio - material change from source to production area to the point of use. Technological, environmental change will also require ships of different configuration, size and tank coating type as well as impact on the tonne mile demand. Recently biofuel is driving a new technology worldwide; the use of biofuels for cars and public vehicles has grown significantly. Effect on shipping is likely to be followed by shipping of large scale growth on exports and seaborne trade of biomass product from key exporting regions in order to balance supply and demand. With excess capacity waiting for source material it seems inevitable that shipping demand will increase.

 

5.2 Classification of biomass

 

3.1 According to generation types

 

Biomass generation and growing trend can be classified into 3 generation types:

 

First generation biofuels, are made from food like from sugar or starch, vegetable oil or animal fats to produce biodiesel.

Second generation biofuels, are waste derived biomass from agricultural and forestry, fast-growing grasses and trees specially grown as so-called "energy crops".

Third generation biofuels, use green fuels like algae biofuel made from energy and biomass crops that have been designed in such a way that their s tructure or properties conform to the requirements of a particular bioconversion process.

 

5.2.1 According to sources types

North American Electric Reliability Council (NERC) region supply has classified biofuel into the following four types: agricultural residues, energy crops, forestry residues, and urban wood waste and mill residues. A brief description of each type of biomass is provided below:

1. Agricultural residues from the remaining stalks and biomass material left on the ground can be collected and used for energy generation purposes this include residues of wheat straw
2. Energy crops are produced solely or primarily for use as feedstocks in energy generation processes. Energy crops includes hybrid, switch grassgrown on idled, or in pasture. The most important agricultural commodity crops being planted in the United States are corn, wheat, and soybeans represent about 70 percent of total cropland harvested. Thus, this is not encouraged to prevent food scarcity.
3. Forestry residues are composed of logging residues, rough rotten salvageable dead wood, and excess small pole trees.
4. Urban wood, waste and mill residues are waste woods from manufacturing operations that would otherwise be landfilled. The urban wood waste and mill residue category includes primary mill residues and urban wood such as pallets, construction waste, and demolition debris, which are not otherwise useful.

Biomass for electricity generation is treated in four ways in NEMS:

                                 i.            new dedicated biomass or biomass gasification,

                                ii.            existing and new plants that co-fire biomass with coal,

                              iii.            existing plants that combust biomass directly in an open-loop process,and

                              iv.            biomass use in industrial cogeneration applications. Existing biomass plants are accounted for using information such as on-line years, efficiencies, heat rates, and retirement dates, obtained through EIA surveys of the electricity generation sector.

6.0 Choice of conventional power system

 

5.2.1 Internal Combustion and Diesel Engines: Two common load following generation technologies involve the use of diesel in compression ignition engines (diesel engines), and natural gas in internal combustion engines (ICEs). Both of these engine types may also be run on sustainable fuels derived from biomass and waste, with diesel engines running on biodiesel, pyrolysis oil, or vegetable oil, and ICEs running on biogas, ethanol or methanol and this requires little or no modification. Diesel engine generating sets with rated outputs from 50 kWe to 10 MWe, and ICE generating sets with rated outputs of between 100 kWe and 2 MWe are available. Figure 6 shows diesel engine retrofit option towards reducing emission. Typically in the order of 2:1, and electrical efficiencies at full load are around 25 to 30%, again varying with partial load. Figure 6 shows a typical internal combustion engine.

Figure 6: Typical steam plant unit system

 

5.2.2 Steam Turbines: Steam turbines may be used for larger applications (between 1 and 1000 MW). These use an external boiler to raise steam, which may be fuelled by any

type of solid, liquid or gaseous fuel desired..This steam is then expanded across turbine blades to produce rotary motion, and, when coupled with a generator, electricity]. Again, waste heat may be recovered for use. Figure 7 shows typical staem engine system Electrical efficiencies at full load can range from 15 to 50%, depending on the complexity of design. This means that heat to electricity ratios can vary from 1:1 to 5:1. This generation method is particularly suited to the use of large

Figure 7: Steam engine system           

quantities of solid waste or biomass, provided suitable boilers are used, though start-up times are slow.

5.2.3 Stirling Engines: A Stirling engine is an external combustion engine, where combustion of the fuel does not take place inside the engine, but in an external boiler. Mechanical work is derived from the pressure changes that result from the cyclic heating and cooling of an enclosed working gas. Heat from any source may be used to run a Stirling engine, including concentrated solar rays, and waste heat but only fuelled Stirling engines will be considered here. This type of engine has many advantages over other engines and turbines as it allows the use of fuels that are hard to process, and it has a fairly simple design, which makes it suitable for small-scale applications, gives the plant a lower capital cost and reduces maintenance costs. Interest in Stirling engines is beginning to re-emerge due to increased interest in biofuel use. Currently available Stirling engine generating set outputs vary from 1 kWe to 200kWe, although larger engines are feasible. Figure 8 shows  typical gas turbine engine.

7. Choice of cogeneration alternative energy

 

7.1 Fuel Cells: The principle of the fuel cell was discovered over 150 years ago. NASA has improved the system in their emission free operation for spacecraft. Recent years has also seen improvement in vehicles, stationary and portable applications. As a result of this increased interest, stationary power plants from 200W to 2 MW are now commercially available, with efficiencies ranging from 30 to 50% and heat to electricity ratios from 0.5:1 to 2:1. Fuel cell re load follower energy, the efficiency of a fuel cell typically increases at lower loadings. Fuel cell system also has fast response. This make them well suited to load following and transport applications. Fuel cell is advanced alternative energy technology with electrochemical conversion of fuel directly into electricity without intermediate stage, the combustion of fuel; hence by-pass the restriction of second law of thermodynamic .the basic fuel supply in the fuel cell systems is hydrogen and carbon dioxide.  [9,10,11] .                

Phosphoric acid fuel cell distribution:  Fuel cell can be distributed directly through the following ways:

1. Direct supply to residential and commercial facilities through pipelines Modular cell that can be stack according to power need
2. Building hydrogen fuel cell power plant in remote location and distribute energy through power grid.

 

                Comparing the efficiency of fuel cell to other source of alternative energy source, fuel cell is the most promising and economical source that guarantee future replacement of fossil fuel. However efficiency maximization of fuel cell power plant remains important issue that needs consideration for its commercialization. As a result the following are important consideration for efficient fuel cell power plant efficiency calculation can be done through the following formula fi9 shows a typical fuel cell power system:

                          Advantages of fuel cell include size, weigh, flexibility, efficiency, safety, topography, cleanliness. Mostly use as catalyst in PAFC, and however recovery of platinum from worn -out cell can reduce the cost and market of the use of PACF economical. It has cost advantage over conventional fossil fuel energy and alternative energy. Disadvantages of fuel cell are adaptation, training, and cost of disposal. Fuel cell has found application in transportation, commercial facility, residential faculty, space craft and battery. Figure 9 shows a typical arrangement fuel cell hybrid power configuration.

 

 7.2 Solar energy system: History and human existent has proved that the sun is the source of all existing energy on earth.  From plant photosynthesis to formation of biomass earth fossil fuel including oil and coal, to the generation of wind and hydrogen power, the sun has his mark on almost every planetary system.  For decades, people have worked to generate renewable and cost saving solar energy.  But little has been achieved to get a lot out f its abundant supply of sun light. Harnessing energy from sun require production, distribution, control and consumer utilization at low cost. Risk work for the system should address the back drop and hybrid system alternative energy system that can be installing as auxiliary for synchronization through automatic control system that activate storage supply whenever supply is approaching the minimum setup limit. Prior to installing solar, it is important to collect, analyze data and information to determined initial condition necessary to start the project and come with acceptable design. Such data should be use for simulation and construction of prototype model of the system that include existing system, central receiver, collectors, power conversion, control system,  sunlight storage, solar radiation to supply a solar system to convert sunlight to electricity and distribute through existing channel.   

 

8. Hybrid system 

               

                With a focus on developing applications for clean, renewable, non-fossil fuel, energy systems. Our final emphasis is on maritime related activities, however, as marine engineers we are devoted to promoting all types of alternative & sustainable energy technologies.Various types of engine, turbine and fuel cell may be run on a variety of fuels for combined heat and power production. Hybrid system can provide control over power needs, green and sustainable energy that delivers a price that is acceptable and competitive. The power plants can be located where it is needed less high power lines are required, not only reducing costs but assisting health by reducing magnetic fields that people are so worried about, Global warming is addressed d by direct action by providing power that does not release any emissions or discharges of any kind. The technology associated with the design, manufacture and operation of marine equipment is changing rapidly. The traditional manner in which regulatory requirements for marine electrical power supply systems have developed, based largely on incidents and failures, is no longer acceptable. Figure 10 show a typical hybrid power arrangement for solar hydrogen and conventional power. Fifure 11 ,, 12, and 13 can be hybrid to the same sstem to provide integrated alternative energy power

 

Figure 10: Hybrid configuration

 

Current international requirements for marine electrical power supply equipment and machinery such as engines, turbines and batteries have evolved over decades and their applicability to new technologies and operating regimes is now being questioned by organizations responsible for the regulation of safety and reliability of ships. [7, 11].

 

                Various technologies have been employed towards the use of alternative free energy of the sun since the first discovery in the 18th century. Improvement and development has been made towards making it available for use like existing reigning source of energy. Major equipment and hardware for the hybrid configuration are:

 

•  
  1. Semiconductor solar with high efficient storage capability will be designed
  2. Hybrid back- up power will be design based with integrative capability to other alternative power source like wind and hydrogen
  3. Controller design for power synchronization will be designed and prototyped
  4. Inverter and other power conversion units will be selected based on power needs
  5. Solar collector or receiver with high efficiency collection capacity will be designed
  6. Software development and simulation
  7. Steam will be used as energy transfer medium

 

                The power plants can be built in small units combined, which allow greater control over the output and maintains full operational output 100% of the time. The plant produces fewer emissions, the plant can be located close to the areas where the power is required cutting down on the need for expensive high power lines. Excess energy produced can be connected to the grid under power purchase arrangement.

  The system can be built in independent power configuration and user will be free from supply cut out. In a typical off-grid scenario a large battery bank is required to store energy. Solar hydrogen hybrid energy is stored in the form of hydrogen gas. When it is dark out, instead of drawing energy from a battery bank,

 hydrogen gas is converted into electricity through a fuel-cell. Likewise, during the day when there is plenty of energy from the sun, water is converted into hydrogen gas through the use of a hydrogen generator. Most electrical power systems are a combination of small units of power group to provide the larger output.

                

Hybrid system design should begin with problem definition of providing a port with power, follow by refining the design so that each individual units power output could be combined to provide the input for a larger unit and ensure efficient, effect operation, maintenance. The hybrid system should be able to provide more power that can keep the stress and strain of operation to a minimum and reduces the failure of the component parts.  

 

  The hybrid system can provide means to by- pass and overcome limitation posed by past work in generating replaceable natural energy of the sun and other renewable energy source that can be designed in hybrid system. Reliable deployment of hybrid system developments of mathematical model follow by prototyping, experimentation and simulation of the system are key to the design and its implementation. The main advantages of hybrid configurations are: Redundancy and modularity, high reliability of hybrid circuitry embedded control system, improve emergency energy switching and transfer, low operating cost through integrated design, low environmental impacts due to nature of the energy source. System optimization with combined heat and alternative power production technologies:

1. The Production and Storage of Heat
2. Space Heating Storage Heaters
3. Hot Water Storage
4. Instantaneous Space and Water Heaters
5. Uses for Excess Electricity
6. Electricity Storage Devices

 

9. Potential impacts to marine system

 

9.1 Impact to marine system

The use of biofuels as a fuel has increased in most transportation sectors. Adopting this technology in marine industry is still slow despite flexibility offered by use of energy on ship compare to mass requirement for land based industry and ambient temperature performance for aviation industry. Cost remain one of the main driver,  slow speed diesel engines can run on lower quality fuels, they can replace distillate marine oils associated technical difficult. Calorific energy value for main propulsion could also result in a reduced service speed, range or larger bunker tanks. Major benefit of using environmental friendly engine is illustrated in figure 16.

Figure 16: benefit of using environmental friendly engine

9.1.1 Potential for port coastal and port infrastructure: A variety of methods could turn an age-old natural resource into a new and efficient means of generating electricity. Biomass in large amounts is available in many areas, and is being considered as a fuel source for future generation of electricity. Biomass is bulky, widely distributed and electricity from conventional, centralized power plants requires an extensive distribution network. Traditionally power is generated through centralized, conventional power plant, where biomass is transported to the central plant. Typically a steam or gas turbine power plant and the electricity is then distributed through the grid to the end users.  

9.1.2 Potential for ship and offshore system: Micro-biomass power generators seem to offer a path for new solution for energy at end user disposal. Recent development towards use of micro biomass can offer best practice adaptation for marine unitized biomass power. Such biomass can be used near the site of end-use, with heat from external combustion converted directly to electricity by a biomass fired free-piston genset. Costs of installation include fuel acquisition and maintenance of the genset and burner. Since the electricity is used on site, both transmission losses and distribution costs are minimal. Thus, in areas without existing infrastructure to transmit power, there are no additional costs. It is also possible to cogenerate using the rejected heat for space or hot water heating, or absorption cooling. This is ideal for ship and offshore system. Figure 17 shows typical prime mover arrangement for ship

Micro-biomass power generation is a more advantageous and cost-effective means of providing power than centralised biomass power generation. Especially in area where there is a need for both power and heating. Domestic hot water, space heat and absorption chilling are attractive for cogeneration configurations of microbiofuel plant. Biomass can be generated using single or ganged free-piston Stirling engines gensets. They can be placed at the end-user location taking advantage of local fuel prices and do not require a distribution grid. They can directly provide electrical output with integral linear alternators, or where power requirements are larger they can be connected in series and parallel to drive a conventional rotary turbine. They are hermetically sealed and offer long lives through their non-contact operation [12,13].

Biomass is a substantial opportunity to generate micro-biomass electric power, at power levels from fractions of kilowatts through to tens or hundreds of kilowatts, at the point of end use. Neither small internal combustion engines, which cannot use biomass directly, nor reciprocating steam engines, with low efficiency and limited life, can offer the end user economic electric power. Free-piston Stirling micro biomass engine are an economic alternative. Stirling offers the following advantages over significantly larger systems:

1. Stirling machines have reasonable overall efficiencies at moderate heater head temperatures (~600ƒC)
2. cogeneration is simple
3. large amounts of capital do not have to be raised to build a single evaluation plant with its associated technical and economic risks
4. A large fraction of the value of the engine alternator can be reused at the end of its life
5. Stirling systems can be ganged with multiple units operating in parallel.

Biodiesel machinery design, installation, operation    

and maontaonace requirements are:

1. Fuel management: Fuel management is complex in this new era because fuel aging and oxidation can lead to high acid number, high viscosity, the formation of gums and sediments. Supply chain supply of biofuel to ship can be done through pre-mixed to the required blend. Here the biofuel and diesel are supplied separately to the ship, and then mixed on board. This gives the operator the chance to dictate the exact blend of biofuels depending on conditions. But that would require retrofitting or new technology to be installed on board together with additional complexity for the crew. It is also important to monitor the fuel acid number value to ensure that no rancid, acidic fuel is introduced to the injection system. A typical layout should involve separators to ensure that water is removed from the fuel, as well as heaters at various stages to ensure the fuel is at the correct temperature before they enter engine.
2. Temperature monitoring system: Technical problem that need to be further mitigated is the CFPP indication of low temperature operability of range between 0°C and 15°C for different types of biodiesels. This can cause problems with filter clogging, this can only be overcome by carefully monitoring of the fuel tank temperatures. This can affect ships operating in cold climates, where additional tank heating coils and heating may be required to avoid this from happening.
3. Corrosion control: Biodiesels are hygroscopic and require to be maintained at  1200-1500 ppm water, which can cause significant corrosion damage to fuel injection systems. Mitigation can be exercise through appropriate fuel conditioning prior to injection. Biodiesels. Injector fouling especially the blend type produces deposits due to presence of fatty acid and water in the fuel. This can result to increased corrosion of the injector system. Also viscous glycerides can contribute to further injector coking. Biodiesel due to its chemical properties degrades, softens or seeps through some gaskets and seals with prolonged exposure. Biodiesels are knows to be good solvents and therefore cause coating complexity. Reports of aggressiveness of biodiesel and bioethanol on tank coatings have been reported. In its pure form biodiesel, as a methyl ester, is less aggressive to epoxy coatings than ethanol. Therefore ethanol should be carried in tanks coated with dedicated tank coatings such a phenolic epoxy or zinc silicate tank coatings.
4.  Lubrication: Biofuel lubricant may have impact on engine crankcase cleanliness and the potential consequences of fuel dilution. The droplet characteristics and lower volatility of biodiesel compared with conventional diesel, together with spray pattern and wall impingement in the modern diesel engines, can help noncombusted biodiesel past the piston rings. And also to make contact with the cylinder liner and be scrapped down into the oil sump. The unburnt biodiesel tends to remain in the sump and the level of contamination may progressively build up over time. This can result in reduced lubricant viscosity and higher risk of component wear. A serious concern is the possibility that the unburnt biodiesel entering the oil sump may be oxidised, thus promoting oil thickening and requiring greater oil changes.

 

9.2 Impact to shipping

 

It is clear that biomass will fuel freight increase as well asspecialized new design of chemical tankers. Biodiesel is an IMO 2 cargo, its vegetable oil feedstocks are IMO cargoes with double hull IMO 3 vessel configuration required. Ethanol typically transports in chemical tankers due to its cargo requirement but technological change break through could bring potential regulatory design change. Flexibility for ship conversion and retrofitting system could upset initial cost problem.

 

9.2.1 Port, Inland waterways and coastal vessel: There is potential for us of biodiesels for small craft that operate within inland water because of air and water pollution sensitivity associated with inland water transportation. The port facilities in Malaysia and Indonesia are already being improved to handle Handysize and Panamax tankers. There is also potential requirement for transshipment and supply vessel, supply chain for short sea service.

 

 

9.2.2 Cargo: 3rd generation biofuels wil required to be processed from solid cargoes to liquid cargoes. Of the wood currently harvested, 30% is waste. This is not going to be a waste in the future and will be converted by a Fischer Tropsch biomass to liquid processing plant. For coastal shipping to handle this trade, there wil be need for new generation of 5,000 tonne deadweight dry cargo vessels. It is expected that these voyages will be regulated under the new Dry Bulk Cargo Code (BC Code). This is due to become mandatory in 2011.

 

6.2.3 Shipping Routes and Economics Impacts

 

The above trend analysis discussed indicate potential capacity requirement from shipping. so far North America, Europe and South East Asia are the key importing regions where this growth is concentrated. Latin American counties of Brazil, Argentina, Bolivia, and Paraguay and Southeast Asia's Indonesia and Malaysia will remain key suppliers for the palm oil, Philippines and Papua New Guinea have potentials for vegetable oil and agricultural while Thailand has potential for sugarcane. 

 

6.2.5 Regulatory framework impact

 

In many parts of the world, environmental concerns are the leading political driver for biofuels. This driving force evolved regulation like Kyoto protocoal, Marpol Annex VI and other environmental regulation. The tonne mile demand for future tankers will be greatly affected by national, regional, global policy and political decision making. There is a greater flexibility in the sourcing of biofuels than there is in hydrocarbon energy sources and this may be attractive to particular governments. Once the regulatory framework is clear, economics will determine how the regulations will best be met and seaborne trade will be at the centre of the outcome.

 

10. Conclusion

The main challenge to use of biomass for power generation, therefore, is to develop more-efficient, lower-cost systems. Advanced biomass-based systems for power generation require fuel upgrading, combustion cycle improvement, and better flue-gas treatment. Future biomass based power. Generation technologies need to provide superior environmental protection at lower cost by combining sophisticated biomass preparation, combustion, and conversion processes with post combustion cleanup. Such systems include fluidized combustion, biomass integrated gasification, and biomass externally fired gas turbines. Ships life cycle is around 20- 25, for ship owners to make the most of the upcoming markets, it is necessary to be prepared for the new cargoes.  Current ship designs may not be suited for biofuel ships. Therefore there is potential for pressure on organizations to adopt new standards to accommodate the demand driven by governmental legislation. This in itself has some risk involved, also the trade routes could create economy of large scale leading to larger ship production and sub sequential requirement from designer .Other evolving challenges to secure energy and environment are Fuel cell technology, nuclear, natural gas and fuels made from waste plastics.

 

 

Reference

 [1] Sustainable Energy Ireland. "CO2 and Other Environmental Emissions Data" Table 7D, web site www.irish-energy.ie/publications/ index.html.

[2] M. K. Mann and P. L. Spath, "A Comparison of the Environmental Consequences of Power from Biomass, Coal, and Natural Gas". Presentation at

[3] the Energy Analysis Forum. Golden, CO, May 29-30, 2002. web site www.nrel.gov/analysis/pdfs/m_mann.pdf.

[4] G. Wiltsee. "Lessons Learned from Existing Biomass Power Plants." NREL/SR-570-26946 Golden, CO: National Renewable Energy Laboratory, February 2000. web site www.nrel.gov/docs/fy00osti/26946.pdf.

[5] Lane, N. W. and Beale, W.T. (1996a). "Stirling Engines for Micro-Cogen and Cooling. Proc Strategic Gas Forum". Detroit M. June 19-20, 1996.

[6] R.L. Graham, B.C. English, and C.E. Noon, "A Geographic Information System-based Modeling System for Evaluating the Cost of Delivered Energy Crop Feedstocks" Biomass and Bioenergy, Vol. 18 (2000), pp. 309-329.

 [7] M. J. Grubb. "The Integration of Renewable Electricity Sources". Energy Policy. 1991. Vol. 19, No. 7.pp 670-688.

[8] F. R. McLarnon, E. J. Cairns, "Energy Storage", Review of Energy, Vol. 14, pp 241-271.

[9] IMO, "Marine Environmental Protection Committee". 44th session available at: http: www.imo.org/meeting/44.html, 2000.

[10] H. Lund, P. A. Ostergaard. "Electric Grid and Heat Planning Scenarios with Centralised and Distributed Sources of Conventional. CHP and Wind generation". Energy 25.  2000, pp 299-312.

[11] D. McEvoy, D. C. Gibbs, J. W. S. Longhurst, "City-regions and the Development of Sustainable Energy Supply Systems". Int. J. Energy Res. 2000, 24. pp 215-237.

[12] G. C. Seeling-Hochmuth, "A combined optimisation concept for the design and operation strategy of hybrid-PV energy systems". Solar Energy. 1997. Vol. 61, No. 2. pp 77-87.

[17] R. Chedid, S. Rahman, "Unit sizing and control of hybrid wind-solar power systems". IEEE Transactions on Energy Conversion. 1997. Vol. 12, No. 1. pp 79-85.

 

 

.

 

 

About the Author

Diesel Men's Loop On Athleisure $94.95 If you’re a fan of orderly laces and the latest style, the Loop On from Diesel is perfect. The “hint of a soccer shoe� design features a neatly textured leather upper and distinctive overlays for good looks that last. Plus a distinctive lace-up system transforms this sneaker into a slip-on that you can adjust for a perfect fit. Even though this sneaker is built for speed with a race-spec pentagonal tread pattern, your comfort’s not neglected thanks to a padded collar and tongue, soft textile lining and cushioned foot.

Diesel Loop Leather Trainers $50 - Stylish lightweight trainers by Diesel- Classic lace up design with textured branding to tongue- Bold panelled upper with prominent stitching- Embroidered branding to side with emblem to heel cuff- Slim rubber grip sole with distinctive brand logo

Diesel Men's Loop Fashion Sneaker $90.25 Diesel's trendy Loop shoe can easily be paired with business casual attire, or with jeans and khakis for weekend wear. The smooth leather upper adds class that makes this shoe incredibly versatile. A padded insole makes this shoe more comfortable than others, and a thick rubber sole adds durability.

Diesel Men's Eagle Loop Sneaker $80.1 Meet the streets in style with this fashion sneaker from Diesel. The Eagle Loop's durable leather upper features panel stitching beneath a logo for a classic look. Lace up front delivers a true fit, while the rubber sole delivers greater traction on or off the street.

Diesel Men's Eagle Loop-On Sneaker $95 Bring racing circuit vibe to your sneaker look with the Eagle Loop from Diesel. The leather upper has a racecar profile with its more fitted lines and low-rising construction. Simple detail hits enhance the curb appeal while the flexible sole and padded collar make a smooth, comfortable fit and feel.

Diesel Mens Loop White Blue Night Shoes $72.99 Like to be in the loop when it comes to fashion? Then get your feet into a pair of Loop sneakers from Diesel. These shoes are not only comfortable, they are extremely attractive. The subtle overlaying details makes this simple shoe one that is sure to attract attention. Brand: Diesel Type: Sneakers Color: White Material: Leather & Synthetic Age Group: Adult Gender: Male Condition: New Color Mapping: White

Diesel Mens Loop Bungee Cord Licorice Shoes $77.99 Like to be in the loop when it comes to fashion? Then get your feet into a pair of Loop sneakers from Diesel. These shoes are not only comfortable, they are extremely attractive. The subtle overlaying details makes this simple shoe one that is sure to attract attention. Brand: Diesel Type: Sneakers Color: Brown Material: Leather & Synthetic Age Group: Adult Gender: Male Condition: New Color Mapping: Brown

Diesel Men's Loop Lace-up Shoe $94.95 Diesel's trendy Loop shoe can easily be paired with business casual attire, or with jeans and khakis for weekend wear. The smooth leather upper adds class that makes this shoe incredibly versatile. A padded insole makes this shoe more comfortable than others, and a thick rubber sole adds durability.

Diesel Men's Eagle Loop Lace-Up $94.95 Kick back in style with this trendy fashion sneaker from Diesel. Crafted with a suede and fabric upper, the Eagle Loop features stitching details and a logo swoosh on the side for a sporty touch. Throw in a rubber sole and you’ve got a sneaker that will deliver on or off the street.

Diesel Loop-On White Mens Lace Up Sneakers $77.99 Diesel offers trendy and stylish models that look great with jeans. Diesel provides a great look but also provides comfort with a rubber sole allowing for everyday use. When it comes to choosing an outfit Diesels are always a good way to go! Brand: Diesel Type: Sneakers Color: White Material: Leather Age Group: Adult Gender: Male Condition: New Color Mapping: White

Diesel Eagle Loop Blue Nights Mens Lace Up Sneakers $77.99 Diesel offers trendy and stylish models that look great with jeans. Diesel provides a great look but also provides comfort with a rubber sole allowing for everyday use. When it comes to choosing an outfit Diesels are always a good way to go! Brand: Diesel Type: Sneakers Color: Blue Material: Leather Age Group: Adult Gender: Male Condition: New Color Mapping: Blue

Diesel Eagle Loop White Mens Lace Up Sneakers $77.99 Diesel offers trendy and stylish models that look great with jeans. Diesel provides a great look but also provides comfort with a rubber sole allowing for everyday use. When it comes to choosing an outfit Diesels are always a good way to go! Brand: Diesel Type: Sneakers Color: White Material: Leather Age Group: Adult Gender: Male Condition: New Color Mapping: White

Ubc Loop $79.66 High Quality Content by WIKIPEDIA articles UBC Loop is a major public transit exchange point in the University Endowment Lands adjacent to Vancouver, British Columbia, Canada. It mostly serves students, staff and faculty members of the University of British Columbia. The loop is part of the TransLink system and currently contains two temporary bus loops: one for trolley buses and one for diesel buses (the north bus loop). These loops replaced the old bus loop to make room for a new underground bus loop. The new underground bus loop is slated to be built beside the Student Union Building, on the site of a small mound called The Grassy Knoll. The Grassy Knoll is planned to be removed for that purpose a plan that is unpopular with a few students of UBC. Several students were arrested after a protest turned into a showdown with police in April 2008. In addition to this, a peaceful protest comprising of several artistic structures was destroyed by an unknown vandal several weeks later. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 110 Publication Date: 2010/08/13 Language: English Dimensions: 6.00 x 9.02 x 0.26 inches

Diesel Benicio Belt $50 Benicio Belt Luxurious leather belt by Diesel with a distressed finish and raw edging. The belt features multi perforated eyelets, a tarnished buckle and a brand embossed cross over loop design to the end. Mens belt > Distressed finish > Perforated eyelets > Embossed branding > 100% Leather > Do not wash

Diesel Men's Nicy Slip-On $94.95 Go anywhere wearing anything in this Nicy shoe from Diesel. The retro-inspired sneaker features a smooth leather and suede upper, while a hook-and-loop strap weaves through the top of the shoe to add convenience to this fashion-forward style.

Diesel Men's Nicy Athleisure $47.5 Throw your look for a loop in the Nicy from Diesel. What separates this sneaker from the crowd is a neat hook-and-loop closure that creates a perfect fit while adding a lot of style to the sleek profile. That distinctive lacing system combined with a leather and textile upper creates a distinctive look that goes great with blue and black denim. A Lightly cushioned fabric footbed and extremely flexible soles ensures you stay comfortable and sure-footed at the same time.

Diesel Men's Nicy Fashion Sneaker $90.2 Go anywhere wearing anything in the Nicy from Diesel. The retro-inspired sneaker features a smooth leather and suede upper, while a hook-and-loop strap weaves through the top of the shoe to add convenience to this fashion-forward style.

Diesel Clawster Strap Fashion Sneaker $90 Take your style to new heights, courtesy of the Clawster Strap from Diesel. Featuring a bold look and stand-out paneling, the Claswter boasts a hook-and-loop strap across the ankle for added support and a custom fit.

In The Loop $14.29 In The Loop

Diesel Men's Groovy Athleisure $124.95 The grooviness is the details when it comes to the Groovy Athleisure sneaker from Diesel. From top to bottom, this sneaker goes about its business a bit differently with patent detailing at the heel along with distinctive pull up loops. The lace-up closure system with a hook-and-loop strap over the instep is a unique look that creates a snug fit with no bows in sight. Inside your foot is well cared for with a soft lining and lightly cushioned footbed. A light, flexible outsole keeps you sure footed in any condition.

Diesel Backstage Cross Body Bag $72 - Stylish leather cross body bag by Diesel- Detachable long length strap with tassle clasp design- Rouched opening with faded dye effect and drawstring- Metal loop embellishment to drawstring- Bold branding patch to front with badge to inner- Contrast lining with zip and stud fastening

Footman Loop by Kentrol $5.99 1955-06 Jeep Wrangler and Jeep CJ;Black powder coat stainless steel;Includes all mounting hardware JEEP CJ-3B CJ5 CJ7 1955 1956 1957 1958 1959 1960 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 2.2L (134) 2.5L (150) 2.5L Iron Duke LX8 (151) 3.1L Diesel (192) 3.7L Dauntless (225) 3.8L (232) 4.2L (258) 5L (304) DIESEL GAS Footman Loop by Kentrol

Diesel $13.99 Men's 0.15 oz EDT Mini. Created in 1996 Diesel is described as a refined oriental woody fragrance. This masculine scent possesses a blend of pepper mandarin lemon ginger clove and musk. Diesel is recommended for evening use.

In the Loop $19.99 In the Loop - Poster

Diesel - Nicy - 10 (Black/Ash) - Footwear $60.99 6pm.com is proud to offer the Diesel - Nicy - 10 (Black/Ash) - Footwear: Keep your look nice and chill with these sweet sneaks from Diesel! ; Hook-and-loop closure. ; Luscious leather upper with contrasting logo detail. ; Padded collar. ; Soft fabric lining. ; Lightly cushioned man-made footbed. ; Textured man-made sole. ; Weight: 10 oz ; Product measurements were taken using size 7. Please note that measurements may vary by size.

Diesel - Nicy - 10 (White/Ash) - Footwear $60.99 6pm.com is proud to offer the Diesel - Nicy - 10 (White/Ash) - Footwear: Keep your look nice and chill with these sweet sneaks from Diesel! ; Hook-and-loop closure. ; Luscious leather upper with contrasting logo detail. ; Padded collar. ; Soft fabric lining. ; Lightly cushioned man-made footbed. ; Textured man-made sole. ; Weight: 10 oz ; Product measurements were taken using size 7. Please note that measurements may vary by size.

Diesel - Nicy - 10 (Black/Grey) - Footwear $60.99 6pm.com is proud to offer the Diesel - Nicy - 10 (Black/Grey) - Footwear: It's time to add a touch of sugar and spice and everything nice to your look with these stunning sneakers from Diesel! ; Hook-and-loop closure. ; Combo leather and fabric upper with logo detail. ; Fabric lining. ; Lightly cushioned fabric footbed. ; Flexible man-made sole. ; Weight: 11 oz ; Product measurements were taken using size 8.5. Please note that measurements may vary by size.